Monitor Audio IWA-250, IWS-10 & IWB-10 In-Wall Subwoofer Package
Comprised of the IWA-250, IWS-10 and the IWB-10 this in-wall subwoofer package delivers punch and clarity to any setup.
SKU
IWA250-IWS10-IWB10
£849.00
IWA-250
- Rigid, high quality steel case
- Switch mode power supply
- Class D power amplifier delivering up to 250watts into 4ohms (dual IWS-10 drivers)
- High efficiency design resulting in cool running – low thermal output
- DSP controlled with advanced limiters
- <0.5watt standby power consumption (ErP certified)
- DC short circuit protection, over-current and thermal protection
IWS-10
- Rigid Die-cast chassis/basket
- Large vented pole design to reduce power compression, lower distortion and improved power handling
- High tech RDT flat ‘sandwich’ cone technology
- High quality gold plated ‘push’ type terminal – for easy installation
- 8 ohm impedance
- 50mm diameter voice coil with black anodised former –Improves convection cooling effects
- +/- 10mm of excursion – results in controlled bass at low frequencies and delivers high SPL
- Patented Tri-Grip fixing system
- Trim-less, low profile, paintable grille
IWB-10
- Designed to provide optimum performance for IWS-10
- Fits into standard 14” stud bays (16” centres)
- Heavy duty MDF construction
- Rugged laminated vinyl finish
- Pre-wired with external high quality push type terminals
IWA-250 | |
---|---|
Construction | 3mm Thick Fabricated Steel Case, Moulded ABS Front Trim Panel |
Low Frequency Response | 25 Hz-120 Hz |
Maximum Power Output | 250 W @ 4 Ohms |
Dimensions (H x W x D) | 43.7 x 432 x 263mm |
IWS-10 | |
---|---|
Frequency Response | 28Hz - 120Hz |
Impedance (Nominal) | 8 Ohms |
Sensitivity ([email protected]) | 86dB |
Maximum S.P.L (Partnered with IWA-250) | Single Unit - 109.8 dB Pair - 115.8 dB |
Power Handling (RMS) | 150W |
Cut-out Hole Dimensions | 280 x 280mm (11 x 11") |
Mounting Depth | 89.98 mm (3 1/2") |
Fixing Type | 4 Position Tri-Grip dog leg fixings |
Connection | Gold plated "push" type terminals |
Construction Materials | Mineral Filled ABS Plastic (RoHS2 Compliant) |
Overall Dimensions (H x W x D) | 302 x 302 x 92.28 mm (11 7/8 x 11 7/8 x 3 5/8") |
IWB-10 | |
---|---|
Internal Volume | 16.5 Litres |
Dimensions (H x W x D) | 850mm x 351mm x 85mm (33 1/2 x 13 13/16 x 3 11/32") |
Construction Materials | MDF (CARB level 2 approved) |