E70 VELVET

Low Noise Voltage Reference Power Supply
The brand-new low-noise voltage reference power supply effectively reduces the output noises and distortions to an excellent level. Basing on this design, the distortion of E70 VELVET is as low as -125dB and the noise is no higher than 1.3uVrms.

Ultra-low THD+N
THD+N of E70 VELVET is already lower than 0.00006% (A-weighted), accurately restores the music to every detail.

The Three Senses Are One
In addition to the product performance, Topping also pays attention to the convenience of product aesthetic design and controlling. Hearing, vision and touch have been unified on the E70 VELVET.

LDAC 24bit / 96kHz Bluetooth Transmission
E70 VELVET has the certification of Hi-Res Audio Wireless and LDAC> It uses the newest QCC5125 chipset to support LDAC / AAC / SBC / aptX / aptX LL / aptX HD / aptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, Topping abandoned the built-in DAC of QCC5125 and connect its digital signal to AK4499EX to decode.

Newest XMOS XU316 Support DSD 512 & PCM 768kHz
USB input of E70 VELVET has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, and Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.

Coaxial & Optical (Toslink) also Have a Goof Performance
The optical and coaxial input of E70 VELVET supports up to 24 bit / 192 kHz audio, which is suitable for digital turntables, disk players, set-top boxes, so that traditional equipment can also give a new sound.

All Inputs Support Auto On/Off Function
E70 VELVET auto on/off function, it will automatically turn on and set to the input which the signal is valid, and when the signal of E70 VELVET's selection is not valid for 1 minute, it will turn off automatically.

12V Trigger Interface
The E70 VELVET is equipped with a 12V trigger interface, which has both active control (trigger out) and passive control (trigger in). With only one easy-to-obtain 3.5mm to 3.5mm cable, the E70 VELVET can be turned on and off synchronously with other devices equipped with a 12V trigger interface, it is especially convenient when used with amplifiers, especially the L70.

Selectable Output Port
E70 VELVET has balanced XLR output and single ended RCA output. You can choose "XLR only", "RCA only" or "XLR+RCA" output for different applications.

XLR 4V/5V & RCA 2V/2.5V Selectable Output
Topping understand that in addition to the more versatile XLR 4V and RCA 2V outputs, there are also extensive needs for XLR 5V and RCA 2.5V. E70 VELVET adds options to set this to meet a wider range of needs. When XLR 4V and RCA 2V are selected, more devices can be adapted; when XLR 5V and RCA 2.5V are selected, the performance will be pushed from extreme to more extreme.

Preamplifier Function
In addition to the DAC mode with a fixed output level, the E70 VELVET also has a preamplifier mode. In this mode, you can control the output volume from -99dB to 0dB by the knob or by the remote control. This will provide great convenience when connected to a power amplifier or monitor speakers. And also help you leave the budget for a preamplifier.

L70 Will Be the Best Headphone Amplifier for E70 VELVET
The L70 has a design language and style that perfectly matches the E70 VELVET and is sufficient to meet the needs of most headphones or earphones. The E70 VELVET and L70 can be switched on and off through the 12V trigger interface, so that the L70 can be synchronised with automatic or manual on/off of the E70 VELVET.