Highend turntable with 9" Evo tonear
● Acrylic plinth
● Sub-chassis made from Corian with magnetic suspension
● Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat
● Inverted main bearing with ceramic ball/plate
● Belt drive with AC motor with DC driven AC generator
● Electronic speed control with 33/45 rpm switching
● Pre-mounted 9" tonearm 9 cc Evolution
● Tonearm bearings with ABEC 7 ballraces
● Connect it Phono E cable with RCA plugs
6 Perspex SB: The ultimate subchassis turntable for the 21st century
The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields.
A magentic subchassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjust-ment of the sub-chassis. A quiet running AC motor unit drives the platter's outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces. Supplied counterweights are suitable for cartridges weighing between 5-7.5g / 7-10g / 9-11g or 10-14g.
A top-grade connection cable Pro-Ject Connect it E with RCA connectors is supplied (123cm). A dust cover is included.